Telecom Tools For Sale
Telecom installers and technicians set up and maintain critical communications systems allowing texting, calling and internet access. People rely on these systems daily, so setting them up and ensuring they continue to work is a crucial job. At Custom Truck One Source, we offer telecom tools that make setting up communications equipment more straightforward and efficient.
Simplify Installing Telecommunications Equipment
Electrical and utility installers use telecom tools to manage wires below ground and in the air. When installing new equipment, professionals need tools that make the job more efficient. Here are some features you likely look for to keep your crews productive during equipment installations:
- Usability: Your installation equipment should include features that allow you to do the job with fewer headaches. Installing new wires becomes simpler with the right tools.
- Lightweight tools: When installing wires on poles, light equipment allows crews to manage installation with less fatigue.
- Heavy-duty equipment: You want gear that holds up to the rigors of your job, enduring consistent use for years without wearing down or breaking while you work.
Outfitting Linemen With the Necessary Tools
We offer feature-rich tools that allow telecom installers to work below ground and in the air. When laying wires underground, your most helpful tools are rodders. This equipment includes a spool with a flexible fiberglass rod ideal for bending through tight spaces. These rods also have electrical and thermal properties, making them safe for cable-occupied ducts. A rugged outer coating provides resistance to corrosion, chemicals and temperature extremes.
Sheaves, guides and blocks are essential for installing telecom equipment on poles. These tools clamp or hook on existing lines, providing guidance for setting up new ones. They use rollers to guide wires and keep them from catching or snagging, protecting the new wire during installation. They are also highly durable thanks to their aluminum- and steel-framed designs, allowing you to use them repeatedly without needing to replace your equipment.
We’re Here to Serve You
At Custom Truck One Source, we make it our mission to provide you with on-budget equipment delivered on time to build out your electrical contractor telecom kit. We are your reliable telecom tools provider, with locations across the United States to serve you. Here are a few reasons to partner with us for your telecom tools:
- Convenient service: We can answer your calls 24/7, quickly responding to any questions you have while browsing our equipment selection.
- Long-term reliability: We have a history of 30 years in business, helping utility workers find the equipment and tools they need. You can rely on us as your partner for years to come.
- Responsive team: We know your industry and take the time to understand your needs so we can provide the right equipment.
Get Telecom Tools From Custom Truck One Source
We have all the tools you need to manage wires on the job site. We source equipment from top telecom manufacturers to give you a comprehensive equipment selection to improve your work processes.
If you’re exploring new telecom tools for your business, select the products you need and request a free estimate. Feel free to reach out to our team if you need any assistance.
- Lashes any telcom cable/innerduct combination up to 4 in. (10cm) diameter
- Parallel-pull capability overcomes all terrain obstacles
- Interference-free over-lashing with no modifications
- Positive slip-free gear drive (no belts) tested in excess of 1 million cycles
- Lashes to strand sizes 1/4 in. to 3/8 in. (6 – 10 mm) diameter
- Lashes single or bundled cables up to 1 7/8 in. (46mm) onto strand sizes 1/4 in. to 3/8 in. (6-10mm) diameter
- New style strand lock swings out of the way for unobstructed overlashing
- Simple wire routing yields either “normal” or “loose” wire tensionDual wire magazines for loading two coils of stainless steel lashing wire
- Typical wire dimensions: 1200 ft. x .045 in. (365 m x 1.1mm) or 1600 ft. x .038 in. (487m x 1mm)
- Lightweight and compact: Unloaded weight 35 lbs. (16kgs.); only 10 in. O.D. x 18.5 in. long (25 x 47cm). The C2’s tapered housing eases passage through treed areas
- The C2 Cable Lasher is furnished with a 6 ft. (1.6m) bridle rope with snap hooks, an instruction manual and a rugged, lightweight storage chest
- The C2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe
- Like all GMP lashers, the C2 is built to last for many years of service. Components are CNC machined from alloy steel, stainless, bronze and aluminum castings to exacting tolerances and treated to withstand corrosion. Gear drives and sealed bearings assure maximum durability with minimal maintenance.
- Choose bore sizes for 1 5/16 in. (33mm) pin or the smaller 1 1/4 in. pin (31.7mm) for other manufacturers sheaves.
- Sheaves sized for a 1 5/16″ diameter pin, are normally used with the GMP cable sheave shackle, pulling frame or jam skid.
- The pin is supplied with the cable sheave shackle, pulling frame or jam skid.
- Heavy-duty block
- Made from 100% heat treated aluminum alloy
- Contains two vertical side rollers in addition to the cable sheave to minimize cable friction during pulling in
- Consists of a rotating drum supported on a carriage that provides the mounting for a driving mechanism, cable lifters, cable and strand rollers
- Positive internal gear to gear mechanism has no chains or belts to stretch, slip or break
- Constructed with heat-treated, plated steel, stainless steel, brass and aluminum components
- Contains sealed and oiless bearings to minimize maintenance and assure durability
- Pre-drilled and tapped at the factory for mounting of the lasher guard or “halo”. For use when lashing in overgrown areas
- The J2 and every GMP lasher is fully serviceable to “good-as-new” specifications at our factory and at factory-trained service locations around the globe
- Lightweight, constructed primarily of aluminum
- Corrosion Resistant
- Top Swivels for easier placement within vault
- Includes (2) 1 5/16 in. (33mm) diameter locking pins (71717) to lock the jamb skid height and secure the sheave or quadrant block
- Accepts all GMP sheaves and quadrant blocks with widths up to 7 in. (178mm)
- Includes a base unit to accept the upper extensions
- Do not exceed 10,000 lbs. (44.48kN) cable tension when using the short or intermediate extension
- Do not exceed 5,000 (22.24kN) lbs. cable tension when using the long extension
- Minimum Cable Size: 3 in. (76mm)
- Weight: 60 lbs. (27kg)
- Minimum Cable Size: 5 in. (127mm)
- Weight: 90 lbs (40kg)
- Lashes cable from about 2-1/2 to 5-1/4 in. outside diameter or multiple cables up to 5-3/4 in. combined outside diameter
- Nominal spacing between wraps is approximately 18-19 in. (46 to 48cm )
- Lashes on strand from 11/32 to 1/2 in. diameter with one or two spiral wrappings of .045, .061 or .065 in. diameter stainless steel wire
- Parallel-pull capability overcomes most terrain obstacles
- Wire tension constant regardless of amount on spool
- Front rollers guide cables through the machine
- All smooth edges throughout help protect against cable damage
- Modified 18-10 analysis containing approximately 2.5% molybdenum
- More resistant to the corrosive action of most chemicals, including chlorides and sulfides, than any other wire
- Particularly resistant to pitting and pin hole corrosion of the kind commonly caused by salt spray
- Its use provides the best insurance against failure under the most severe atmospheric conditions
- Modified 18-10 analysis containing approximately 2.5% molybdenum
- More resistant to the corrosive action of most chemicals, including chlorides and sulfides, than any other wire
- Particularly resistant to pitting and pin hole corrosion of the kind commonly caused by salt spray
- Its use provides the best insurance against failure under the most severe atmospheric conditions
- Low carbon, 17% chromium wire
- Suitable for general use and in ordinary atmospheric exposure
- Will acquire only a dark surface stain
- Specifically not recommended for use within 25 miles of salt water or industrial operations which emit pollutants
- Low carbon, 17% chromium wire
- Suitable for general use and in ordinary atmospheric exposure
- Will acquire only a dark surface stain
- Specifically not recommended for use within 25 miles of salt water or industrial operations which emit pollutants
- Low carbon, 17% chromium wire
- Suitable for general use and in ordinary atmospheric exposure
- Will acquire only a dark surface stain
- Specifically not recommended for use within 25 miles of salt water or industrial operations which emit pollutants
- 8,000 lb. capacity
- Strong welded steel frame
- Forged steel closure type hooks with 1" opening
- Cable pulling accessory sheaves are aluminum alloy with self-lubricating bearings
- 6″ Bend Radius
- Locate sewer laterals to confirm no cross bore has occurred
- Locate ductile iron, plastic, tile or concrete pipe
- For use in conduit with an inside diameter between 2 and 4 inches
- Includes 800 ft. of 5/16-inch diameter traceable fiberglass rod marked every 5 ft. (Metric every 1m)
- Dimensions: 39″ X 32″ X 18″
- To order 5/16″ Duct Hunter with All-Terrain Wheels add “AWK” to part number.
- For use in conduit measuring 3/4 to 1-1/2 inches
- Includes 300 feet of 3/16-inch diameter rod with a pull/tensile strength of 300 pounds
- Dimensions: 22″ X 17″ X 7″
- Quick, slap-on design
- 1" plastic roller
- Single 1" channel for pulling cable in overlash construction
- Prevents cables from catching or snagging
- Supports up to 1" cables, including fiber optic
- Also available in 3" roller (RO300)