LOCATIONSHydraulic Power Tools & Equipment for Sale
There are no filters available for this category at this time.
There are no filters available for this category at this time.
- Comfort grip handles
- Trigger controlled ram release
- Short handle throw
- Rubber covered handles
- 180° head rotation
- C-shaped head
- Hole for lifting eye
- Positive push button die locks
- Rubber body covering
- Built-in automatic 10,000 psi "Blow-Off" pressure release valve
- Rapid ram advance handle
- Y35-2 has rubber covered head
Your Price:
- Visual, audible crimp indicator assures properly completed crimps
- 350° head rotation for versatile positioning
- Uses all standard BURNDY® U-style dies
- Operates on open or closed center hydraulic systems
- Ergonomic handle design for better balance
Your Price:
- Compact “C” shaped head allows easy placement and removal from continuous conductor lengths.
- Versatile and economicalHYPRESS™ tools work on all commonly used copper and aluminum products.
- Dies and adapters lock into or remove from tool head easily with the positive push button die locks.
- Safety, strength and high quality is provided with strong forged steel and precision machined components.
- Excellent for HYGROUND® compression grounding application through 1” ground rods and up to 500 kcmil taps, terminals and splices.
- C-shaped head
- Hole for lifting eye
- Positive push button die locks
- Rubber body covering
- Built-in automatic 10,000 psi "Blow-Off" pressure release valve
- Rapid ram advance handle
- Y35-2 has rubber covered head
Your Price:
- 2” jaw opening
- Used with P dies
- U dies with PUADP1 adapter
- Positive push button die locks
- Light weight scoop style open head design
Your Price:
- Remote power operated
- Used with BURNDY L, wide L style dies, and HPS/Fargoequivalent 60 ton dies
- Base stand and metal carry case (for head only) included
- Side lift handle
- Single Acting Ram With Heavy Duty Return Spring
- Fast Easy Die Changing And Secure Die Positioning With Positive Die Release Locking Pins
Your Price:
- Aircraft grade 7075-T6 extruded Aluminum body and forged handle for added strength
- CNC machining produces tighter tolerances contributing to increased efficiency,repeatability and flow optimization
- Machined steel sleeve and hardened spool increase wrench efficiency by preventing hydraulic fluid "blow by"
- Balanced weight in assembled configuration
- Reverse flow protection to prevent reverse hook-ups
- Dual spool selector for Open and Closed Center use
- For Use With: Utility pole hardware & Auger drill bits
Your Price:
- Aircraft grade 7075-T6 extruded Aluminum body and forged handle for added strength
- CNC machining produces tighter tolerances contributing to increased efficiency,repeatability and flow optimization
- Machined steel sleeve and hardened spool increase wrench efficiency by preventing hydraulic fluid "blow by"
- Balanced weight in assembled configuration
- Reverse flow protection to prevent reverse hook-ups
- Dual spool selector for Open and Closed Center use
- For Use With: Utility pole hardware & Auger drill bits
Your Price:
- Width: 10.94 in.
- Length: 16.3 in.
- Weight: 111.32 lbs.
- Nominal pressure: 10150 psi
- Force Developed: 1100kN
Your Price:
- Length: 612.4 mm (24.12")
- Width: 150 mm (5.9")
- Mass/Weight: 6.5 kg (14.4 lb)
- Crimping Range: 8 AWG to 750 kcmil
- Crimping Force: 106 kN (12 tons)"
Your Price:
- Blow Energy: 63.000 FT-LB (85 J)
- Blows Per Minute: 2160 BPM
- Handle Type: Cushioned/Spring-Dampened
- Length: 28.500 IN (731.000 MM)
- Shank Size: 1-1/8 IN Diameter X 6.000 IN Length
- Sound Power Level: LWA=110 DB
- Vibration Level: 11.400 M/S2/5.300 M/S2
Your Price:
- Blow Energy: 63.000 FT-LB (85 J)
- Blow Frequency: 1740/MINT At 8 GPM (30 LPM)
- Hose Length: 70.000 IN (178.000 CM)
- Hydraulic Flow Range: 5 - 8 GPM (19 - 30 LPM)
- Hydraulic System: Open And Closed-Center
- Jaw Opening: 1.000 IN (25.000 MM)
- Length: 25-1/2 IN (654.000 MM)
- Maximum Input Pressure: 2000 PSI (138 BAR)
- Pressure Port: 9/16-18 SAE O-Ring On/Off Valve
Your Price:
- Connection: 3/4 - 16 SAE O-Ring External Thread
- Operating Pressure: 3000 PSI (207 BAR)
- Type: HTMA Female, Hydraulic
Your Price:
- Cuts hard-to-reach branchesfrom aerial basket or from the ground
- Super Spool selector control for use on Open- and Closed-Center hydraulic systems
- Available in three lengths
- Insulated fiberglass extension tubes, tested to meet OSHA Regulation 1910.269
- Safety features include: two-step trigger, trigger guard, and fully coveredsprocket guard
- Anti-kickback chain and automatic chain oiler
- Rugged high torque gear motor
- Unfilled and foam-filled extension tube versions offered
Your Price:
- Connection: 3/8 IN NPTF Internal Thread
- Operating Pressure: 3000 PSI (207 BAR)
- Type: HTMA Female, Hydraulic
Your Price:
- Compact, under 12 IN (300 mm) diameter to easily fit into small areas
- Self-priming submersible pump can be placed and operated quickly
- Passes up to 3 IN (76 mm) solids minimizing pump blockage from debris
- Can be run dry without damage for longer working life
- Carry handle with lifting eye makes it easy to transport, move, lift, and lower
- Locking coupler for discharge hose included
- Can draw water down to depth of 2-3/4 IN (70 mm)
Your Price:
- 62" length
- Anti-kickback chain and automatic chain oiler
- Rugged high torque gear motor
- Unfilled and foam-filled extension tube versions offered
- Flow Range: 5 - 8 GPM (19 - 30 LPM)
- Operating Pressure: 1000 - 2000 PSI (69 - 140 BAR)
- Pressure Port: 9/16-18 SAE O-Ring
- Return Port: 3/4-16 SAE O-Ring
Your Price:
- 75" length
- Anti-kickback chain and automatic chain oiler
- Rugged high torque gear motor
- Insulated fiberglass extension tubes, tested to meet OSHA Regulation 1910.269
- Flow Range: 5 - 8 GPM (19 - 30 LPM)
- Operating Pressure: 1000 - 2000 PSI (69 - 140 BAR)
- Pressure Port: 9/16-18 SAE O-Ring
- Return Port: 3/4-16 SAE O-Ring
Your Price:
- 88.5" length
- Anti-kickback chain and automatic chain oiler
- Rugged high torque gear motor
- Insulated fiberglass extension tubes, tested to meet OSHA Regulation 1910.269
- Flow Range: 5 - 8 GPM (19 - 30 LPM)
- Operating Pressure: 1000 - 2000 PSI (69 - 140 BAR)
- Pressure Port: 9/16-18 SAE O-Ring
- Return Port: 3/4-16 SAE O-Ring
Your Price:
- 6 ft. and 10 ft.
- Orange polyurethane non-perforated cover, non-conductive marking and color code
- 3/8" NPT screw-0type male and female connections
- 3/16" diameter
- Includes double rubber caps to protect fittings while not in use
- 40,000 PSI pressure burst rating
- 10,000 PSI max working pressure
Your Price:
- Deep well accepts up to 6 IN (152 mm) excess bolt length
- 7/16 IN hex quick-change adapter included
- Slim profile for easy use and storage
Your Price:
- Adapter for 5/8", 1/2", 13/16", 1" OR 5/8", 1/2", 13/16", 1"
Your Price:
- Lengths of 60" and 85"
- Blow Frequency: 1160 MIN At 5 GPM (19 LPM)
- Flow Range: 4 - 6 GPM (15 - 23 LPM)
- Includes Kidney-Shaped Foot
- Operating Pressure: 1000 - 2000 PSI (69 - 138 BAR)
- Pressure Port: 9/16 - 18 SAE O-Ring
- Return Port: 3/4 - 16 SAE O-Ring
Your Price:
- Punch up to 1/2 in. mild steel
- 13/16 in. max. hole diameter
- Punches round, square, hex, and oblong holes
- Includes Rounch Punch & Dies sets for 3/8", 1/2", 5/8", and 3/4" dia. Custom sizes available
- Operates on 10,000 psi hydraulic pump source"
Your Price:
- 3/8” Male screw type coupler provided
- Protective Rubber Boot on “C” Head
- Kearney style tool that accepts PH-2, WH-2 and WH-3 style dies
- 1.5” Jaw Opening
Your Price:
