Hydraulic Power Tools & Equipment for Sale
There are no filters available for this category at this time.
There are no filters available for this category at this time.
- Removable base
- Oblong lifting ring
- Removable die cap for easy cable insertion
- Extremely Designed for ACSR & ACAR transmission & distribution cable
- Lightest 60 ton presses in the industry
Your Price:
- Highly visible safety orange
- Heavy duty shrink wrap at hose ends for reduced risk of leaking
- Date coded at point of assembly
Your Price:
- Highly visible safety orange
- Heavy duty shrink wrap at hose ends for reduced risk of leaking
- Date coded at point of assembly
Your Price:
- Reduces injury associated with using a boom truck
- Reduce boom damage & maintenance costs from pulling poles
- Increase productivity by saving time
- Hook assembly manufactured with all stainless steel components
- 1/2” alloy chain is proof-tested for durability and strength
- Ultra-lightweight cylinder is only 57 pounds with a lifting capacity of 50,120 pounds.
Your Price:
- Lightweight and Portable
- Lightweight
- Replaceable blades
- Black oxide coated with rubber handled grips
- Guillotine style cutting jaw performs better with less jamming compared to shear-type cutting jaws
- 180 degree swivel and latch type head allows easy cutting position
Your Price:
- Pole Diameter: 8” to 12”
- 86 lbs.
- Includes 8’ of 1/2” alloy chain.
Your Price:
- Twelve sizes combined into six sockets including: 1-1/8 x 15/16-Inch, 1 x 13/16-Inch, 7/8 x 11/16-Inch, 3/4 x 9/16-Inch, 5/8 x 7/16-Inch, and 1/2 x 3/8-Inch
- Single-ended impact socket wrenches with hands free adjustment between socket sizes
- Two coaxial spring loaded sockets in one tool
- Sockets have a high-torque, 12-point design making it easier to position on fasteners
- Deep socket with a 1/2-Inch drive works great for pole hardware installation and removal
- Cross hole design helps maintain socket connection to adapter or impact wrench
- Engineered for use with impact wrenches including Klein's 1/2-Inch Compact Impact Wrench (Cat. Nos. BAT20-CW/BAT20-CW1)
- Sockets are color coded to quickly identify sizes
- Includes case for storage
Your Price:
- 3-in-1 impact socket features three square socket sizes: 3/4-Inch, 1-Inch and 1-1/8-Inch
- 7/16-Inch hex quick-change adapter included
- Fine tuned ball tip provides improved retention, minimizing drops
- 13/16-Inch diameter, 6-Inch (152 mm) long hollow shaft allows use on long threaded bolts
Your Price:
- Impact socket features an alignment slot to tighten and loosen most hot-line clamps
- Single-ended impact socket with hands-free adjustment between socket sizes
- Two common socket sizes (3/4-Inch and 9/16-Inch hex) in one tool
- High-torque, 12-Point design is easier to position and works with square fasteners
- Patent pending design
- Great for a variety of pole line hardware installation and removal
- Cross hole design to prevent unintentional separation of adapter and socket
- Engineered for use with impact tools including Klein Tools’ compact Impact Wrench and Drill (Cat. Nos. BAT20CW, BAT20CW1, BAT20CD and BAT20CD1)
- Color coded with double lines to identify size and slotted feature
Your Price:
- Single-ended impact socket with hands free adjustment between socket sizes
- Two coaxial spring-loaded sockets in one tool
- Includes 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch square socket sizes plus a 7/16-Inch hex quick-change adapter
- Works on 1/2-Inch, 5/8-Inch and 3/4-Inch pole hardware
- 13/16-Inch diameter, 6-Inch (152 mm) long hollow shaft allows use on long threaded bolts
- Cross hole design to prevent unintentional separation of adapter and socket
- Replacement adapter is available (NRHDA4)
- Engineered for use with impact drivers
Your Price:
- 7/16-Inch hex quick-change adapter
- Improved ball detent on socket adapter
- Black finish for rust resistance
- For use with Klein Tools' Impact Socket
Your Price:
- 7/16-Inch hex quick-change adapter for Cat. No. NRHD3
- Improved pin detent on socket adapter
- Black finish for rust resistance
- For use with Klein Tools' Impact Socket
- Made in USA
Your Price:
- Impact Socket with three square socket sizes: 3/4-Inch, 1-Inch and 1-1/8-Inch on same end of tool
- Extend or retract the head for easy access to the size you need
- Includes a 7/16-Inch hex quick-change adapter
- Hollow shaft allows use on long threaded bolts
- Made in USA
- Three sizes in one socket saves time
- Reduces risk of dropping
- Replacement adapter is available (NRHDA3)
- Impact socket has three sizes: 3/4-Inch, 1-Inch and 1-1/8-Inch all on same tool
Your Price:
- 2 speed shift on demand
- Power on demand shifting
- Maximum output torque 14,440 lb-ft.
- 48” Maximum Auger Diameter
- 2-1/2” hex & 2-5/8” Hex output shafts RX inlcudes relief valve to limit to
- 2400 PSI
Your Price:
- Single Action
- 100 Ton Crimp Force
- Operating Pressure of 10,000 psi (700 bar)
- 78 lb. Weight
- 422cc Oil Required
Your Price:
- No tool exhaust
- Quieter operation than pneumatic tools allows for use in sensitive areas
- Hydraulic oil provides continuous lubrication of internal parts for longer service life
- Modular, re-buildable design platform improves serviceability
- Feathering ON/OFF valve to control speed and make initial tool placement easy
- Anti Vibration handles are available in certain models for ease of use
- EZ Ride foot allows for increased control
Your Price:
- 5-9 gpm (19-34 lpm) operating range
- In-line valve on hoses for ON/OFF control
- Assist handles
- Lifting eye
- HTMA quick disconnect couplers
Your Price:
- Ergonomic long saw arm for easier operation
- Lockable lower arm significantly reduces operator effort
- Indexable guard swivel lock
- Sealed bearings in arm swivel joints
- Direct drive hydraulic motor
- Rugged lightweight cast aluminum guard
- Built-in flow control for speed control
- Integrated retractable blade index guide
Your Price:
- Industry-leading pulling force of 16,647 lbs
- Lightest spike puller on the market, only 31 lbs
- Automatic pull cycle reduces kickback and ease of use
- Redesigned handle provides a comfortable grip and alignment for the operator
- New side carry handle simplifies transport
- New seal design extends life and service intervals
- Redesigned lower chute decreased weight
Your Price:
- 4-9 gpm (15-34 lpm) operating range
- Stainless steel, steel, urethane, or cast iron impellers (model dependent)
- Submersible (no priming required)
- Able to run dry without damage
- 3/8 inch strainers
- Lifting eyes
Your Price:
- Large trigger
- Reverse-flow check valve prevents operation if the tool is plumbed backwards
- Built in selector for Open Center or Closed Center systems
- Feathering ON/OFF
- 7/16 quick change chuck or 1/2 inch square drive
Your Price:
- Swing-hammer mechanism
- Feathering ON/OFF
- 1" Square Drive
- Reverse
- Built-in reverse check
Your Price:
- 7-9 gpm (26-34 lpm) operating flow
- Lifting eye
- ON/OFF trigger next to guide handle (model dependent)
- Hose whips
- Nitrogen charged accumulator
- Guide handles
Your Price: