Lineman Test Instruments For Sale

2135-19

AEMC 4620 4-Point Digital Ground Resistance Tester Kit with 150ft Leads for 3-Point
Equipment Cat-Class 2135-19
Your Price:
REQUEST
  • Ground Resistance Tester with 3-point test kit
  • Ground Integrity Measurement
  • Measures soil resistivity (4-Point)
  • Uses Fall-of-Potential method to measure ground resistance (2- and 3-Point)
  • Step voltage tests and touch potential measurements
  • Auto-Ranging: automatically selects the optimum resistance range and test current
  • Designed to reject high levels of noise and interference

2141-01

AEMC Ground Resistance Tester Model 6416
Equipment Cat-Class 2141-01
Your Price:
REQUEST
  • OLED display, 152 segments 48x39mm
  • 300 measurement memory
  • 3 separate alarms (Ω, V and A)
  • Battery lasts 12 hours or 1440 30-seconds tests approx

PD50

Bierer All-Purpose Utility Meter, 0-50kV
Equipment Cat-Class pd50
Your Price:
REQUEST
  • Capacitive Test Point Phasing Meter
  • Regulator Neutral Detector
  • Measure True RMS Voltages
  • Commercial/Industrial Meter
  • Phasing or Measuring Secondary Voltages, Replacing 600V Voltmeters
  • Conventional Phasing Voltmeter for Overhead and URD Systems from 0-50kV Phase to Phase
  • DC and Multiple Frequency AC up to 400Hz

83280

Bierer Analog Phasing Voltage Detector, 300 Volt, 25kV & 35kV
Equipment Cat-Class 83280
Your Price:
REQUEST
  • Can be used as a Stand-Alone Voltage Detector without the Second Probe
  • A Conventional Phasing Meter both Overhead and URD Applications
  • Phase Capacitive Test Points
  • A Large Easy to Read Analog Meter
  • Meter Housing is Completely Shielded to Minimize Stray Field Indications
  • An Insulated (35kV) Interconnect Cable with Second Probe
  • Each Probe is Impact and Water Resistant
  • Meter is Stored in a Highly Durable Padded Carrying Case

VDAH300

Bierer Analog Voltage Detector, 2.4kV - 300kV
Equipment Cat-Class vdah300
Your Price:
REQUEST
  • 2.4kV - 300kV Line to Ground (4kV - 500kV Phase to Phase) Voltage Range
  • For Overhead and URD Applications
  • Meter is Passive, Battery is Only Required for the Test Position
  • A Linear/Logarithmic Scale for Better Resolution from Distribution to Transmission Systems
  • Meter is designed to Read Approximate Nominal or Induced Voltage Line to Ground
  • Easy-to-Use Detector Requires no Voltage Scale Selectors or Multipliers
  • Meter is Water Resistant and a Strong Construction to withstand Wear
  • Meter is contained in a Durable Padded Case

VDA040P

Bierer Analog Voltage Detector, 2.4kV - 300kV
Equipment Cat-Class vda040p
Your Price:
REQUEST
  • Detects 0-40kV Line to Ground (0-69kV Phase to Phase)
  • Easy to Read Analog Scales
  • Detect Voltage from the Ground on Bare Overhead Lines when Hand Held
  • Test Secondary Voltage on Bare or Insulated Cables

VD1000

Bierer Digital Voltage Detector, 1kV to 999kV
Equipment Cat-Class vd1000
Your Price:
REQUEST
  • Large LED Display
  • LED Segment and Battery Test
  • Standard 9 Volt Battery
  • Water Tight Construction
  • Durable Modular Construction
  • 1 Year Free Replacement Warranty
  • 0-99.9 kV URD, 0-99.9 kV OH, 0-999kV OHT.
  • Backlit continuous for nighttime use
  • Rated for Indoor and Outdoor Use
  • Most versatile and accurate unit in the utility industry
  • Shotgun & Hot Stick Compatible (Universal Grip All Accessory)

VBI-15

Bierer Direct Contact Voltage Break Indicator
Equipment Cat-Class vbi-15
Your Price:
REQUEST
  • Overload protected to 115kV for your safety
  • SAIDI and CAIDI ratings improve by quicker outage response time
  • Water Resistant for inclement weather use
  • Strong Construction designed to withstand wear
  • Packaged in a durable canvas bag

C4033374

CHANCE® Auto-Ranging Voltage Indicator (ARVI), 600V - 69kV
Equipment Cat-Class c4033374
Your Price:
REQUEST
  • Makes hot-line voltage testing easier than ever
  • State-of-the-art electronics eliminate need for selector switch
  • Automatic-ranging function quickly displays approximate phase-to-phase voltage class
  • Simple-to-operate tester attaches to an Epoxiglas® insulating universal handle of appropriate length to maintain proper OSHA working clearances
  • Single push button activates the instrument, then a single light indicates either Power On (by glowing solid) or Low Battery (by blinking)

C4033375

CHANCE® C4033375 Transmission Auto-Ranging Voltage Indicator for Overhead Conductors
Equipment Cat-Class c4033375
Your Price:
REQUEST
  • CHANCE® C4033375 Transmission Auto-Ranging Voltage Indicator
  • For Overhead Conductors

MEAMP32RN

CHANCE® LoadLooker Ammeter, Up to 500kV, 60 Hertz Unit
Equipment Cat-Class meamp32rn
Your Price:
REQUEST
  • Open-end design lets you check loads on components not accessible by other hot-line ammeters
  • Universal fitting mounts on insulated hotsticks
  • Single button operation
  • HOLD feature lets you bring down single reading to eye level
  • Auto shut off after five minutes idle, or manually turn off by depressing button for five seconds

MEAMP11RW

CHANCE® LoadLooker Ammeter, Up to 69kV, 60 Hertz Unit
Equipment Cat-Class meamp11rw
Your Price:
REQUEST
  • Open-end design lets you check loads on components not accessible by other hot-line ammeters
  • Universal fitting mounts on insulated hotsticks
  • Single button operation
  • HOLD feature lets you bring down single reading to eye level
  • Auto shut off after five minutes idle, or manually turn off by depressing button for five seconds

C4031029

CHANCE® Multi-Range Voltage Detector, 16kV - 161kV
Equipment Cat-Class c4031029
Your Price:
REQUEST
  • Helps confirm a line is de-energized prior to performing maintenance
  • Reads field intensity for approximate line-to-line voltage
  • Capable of distinguishing actual line voltage from static or feedover from an adjacent line
  • Must mount on proper length hotstick for the voltage class involved
  • Pushbutton to confirm operational condition before and after each use

C4031140

CHANCE® Multi-Range Voltage Detectors for Overhead Systems to 600kV and URD Elbow Test Points (69 - 600kV, 5-1/2 lbs.)
Equipment Cat-Class c4031140
Your Price:
REQUEST
  • CHANCE® Multi-Range Voltage Detectors
  • For Overhead Systems to 600kV and URD Elbow Test Points
  • 69 - 600kV, 5-1/2 lbs.

H1876-7

CHANCE® Phasing Tester w/ Hook Probes, Case and Manual, 40kV
Equipment Cat-Class h1876-7
Your Price:
REQUEST
  • "Includes only Phasing Meter, Hook Probes, Case, and Instruction Manual (no Universal Poles)
  • Two high-impedance components in fiberglass poles, each threaded for interchangeable probes
  • 22-foot-long insulated flexible cable from voltmeter stores on reel on other pole
  • Must be used with 2 Epoxiglas Insulating Universal Hotsticks (Not Included) of appropriate length"

H18761

CHANCE® Phasing Testers Phasing Tester (16 kV Tester, Hook Probes, 23 lbs.)
Equipment Cat-Class h18761
Your Price:
REQUEST
  • Includes only Phasing Meter, Hook Probes, Case, and Instruction Manual (no Universal Poles)
  • Two high-impedance components in fiberglass poles, each threaded for interchangeable probes
  • 22-foot-long insulated flexible cable from voltmeter stores on reel on other pole
  • Must be used with 2 Epoxiglas Insulating Universal Hotsticks (Not Included) of appropriate length

AWT05-506319

Dillon EDjunior Dynamometer, 10,000-25,000 lbs.
Equipment Cat-Class awt05-506319
Your Price:
REQUEST
  • 10,000-25,000 lb. Capacity

30006-0084

Dillon Mechanical Dynamometer 5″, 5,000-20,000 lbs.
Equipment Cat-Class 30006-0084
Your Price:
REQUEST
  • Reproducibility: +- 0.5% of FS
  • Range Capability: Single (Fixed)
  • Ultimate Overload: 5 to 1
  • Zero Range: 20% of Capacity

AP30JR

EDM PhaseTrakker® Jr. Standard, 120V to 500kV
Equipment Cat-Class ap30jr
Your Price:
REQUEST
  • Phase underground or overhead on 120V to 500kV circuits
  • Test without de-energizing lines
  • Balance loads to minimize system loss
  • Reduce safety hazards and damage to equipment
  • Identify and mark correct phasing for system mapping
  • Ensure substations’ connections are phase correct
  • Export results to GIS without de-energizing power lines (120V to 500kV).

FLUKE-1630-2-FC

Fluke 1630-2 FC Earth Ground Clamp
Equipment Cat-Class fluke-1630-2-fc
Your Price:
REQUEST
  • Test the grounding components of equipment in hard-to-reach spaces
  • AC Leakage Current Measurement
  • Heavy-duty clamp jaw
  • Up to 32,760 measurements in memory

FLUKE-375FC

Fluke 375 FC True-RMS AC/DC Clamp Meter
Equipment Cat-Class fluke-375fc
Your Price:
REQUEST
  • Measures very low voltage and high resistance
  • Fluke Connect® Bluetooth connectivity
  • Measures AC and DC current to 600 A, and AC and DC voltage to 1000 V

CM-660

Greenlee AC True RMS Clamp Meter, 600V, 600A
Equipment Cat-Class cm-660
Your Price:
REQUEST
  • Amperage Measurement 60, 600 Amps AC
  • Frequency Rating: Voltage and AmpTip™ current: 50/60 Hz. High current: 50 to 400 Hz
  • Jaw Opening: 1.18'' (30 mm)
  • Measurement Category: CAT III 600V, CAT IV 300V
  • Resistance Measurement: 600, 6k, 60k Ohms
  • Standard: CAT III, C/US UL Listed, CE
  • True Power: AC True RMS
  • Voltage Measurement: 600 Volts AC/DC

DVI-500

Greenlee Digital Voltage Indicator 500kV, OH
Equipment Cat-Class dvi-500
Your Price:
REQUEST
  • Voltage Rating: 100V - 500kV line-to-ground
  • LED display
  • Operating Temperature: -20°F to +140°F (-29°C to +60°C)
  • Dimensions: 4.25"H x 7"W x 4.5"D (11 cm x 18 cm x 11 cm)
  • Frequency Rating: AC 60Hz (50Hz model available)

HVA-2000

Greenlee High Voltage Ammeter 2000A
Equipment Cat-Class hva-2000
Your Price:
REQUEST
  • Voltage Rating: 0 - 500kV line-to-ground
  • Amperage Rating: 1 -2000A
  • Display: LED display
  • Operating Temperature: -20°F to +140°F (-29°C to +60°C)
  • Dimensions: 4”H x 6.6”W x 11.5”L
  • Frequency Rating: 25 - 500Hz
  • Bag included

T200-KIT-1235

Greenlee TAG® Contact Voltage Detector, 12-35KV, OH/UG
Equipment Cat-Class t200-kit-1235
Your Price:
REQUEST
  • Frequency Rating: 60Hz
  • Voltage Rating: 12-35kV line-to-line
  • Indication Type: Audible and visual alert
  • Overall Length: 7.5"