Load King RH3431 End Dump Trailer
The Load King RH3431 End Dump trailer contains the capacity of 31 CU. YDS with an overall length of 36′. The tub on this end dump is of two-piece construction, unlike competitors that have a vertical seam every 8 feet. Load King utilizes an 8″ five-stage inverted cylinder model for its lifting cylinder making it perfect for construction industries. This end dump will reach a 43-degree dump angle with all 8 wheels on the ground. All Load King end dumps have a tubular steel rail that is installed in a self-shedding configuration.
LENGTHS
Load King manufactures end dumps in lengths from 28 to 35 feet.
TWO PIECE TUB
The tub on the Load King End Dump is of two piece construction. Unlike our competitors that have a vertical seam every eight feet.
HIGH LIFT TAIL GATE
End Dumps manufactured by Load King have a High Lift Gate with 87" clearance.
LIGHTING
The Rear Lighting System on the Load King End Dumps consists of LED Lights, a Grote Sealed Wiring System, Dual Intensity Rear Clearance Lights (Grote Micro Nova) - all contained within a 3 bolt removable light bracket for easy repairs.
AVAILABLE TARP SYSTEMS
Your Load King End Dump can come equipped with either a Manual or an Electric Tarp Option. This gives you the ability to customize your trailer for your exact needs.
SUSPENSION
The Pedestal is unitized to the bottom of the tub to prevent cracking in high stress areas.
CONSTRUCTION
The Load King End Dump Tub is constructed of 1/4" 450-Hard-Ox with 3/16" front and rear tailgates.
DUMP ANGLE
The Load King End Dump will reach a 43 degree dump angle with all 8 wheels on the ground.
CUSTOM HOIST
Load King utilizes an 8" - 5 Stage Inverted cylinder for its lifting cylinder.
TOP RAIL
Load King End Dumps have a Tubular Steel Rail that is installed in a Self Shedding configuration.
TAIL GATE ADDITIONAL FEATURES
Load King uses Dual action Air-Cylinders for the Gate Locks. It also has a Manual Gate Release on the Center Bolster.
LANDING LEGS
Pin type non load bearing leg.
