Load King Side Dump
The Load King Side dump’s lowest center of gravity is not only safer but it’s dump cycle is quicker than end dumps. Side placement of materials can increase productivity On roadway, rail, and other large projects. Loads release faster from a straight side and better dump angle. A 50° dump angle…The most of any side dump trailer manufactured. A 50° dump angle means your load comes out quicker, leaving you with a cleaner tub. With a side dump the driver can see in the mirror where he is dumping!
LENGTHS
Load King manufactures end dumps in lengths from 28 to 35 feet.
TWO PIECE TUB
The tub on the Load King End Dump is of two piece construction. Unlike our competitors that have a vertical seam every eight feet.
HIGH LIFT TAIL GATE
End Dumps manufactured by Load King have a High Lift Gate with 87" clearance.
LIGHTING
The Rear Lighting System on the Load King End Dumps consists of LED Lights, a Grote Sealed Wiring System, Dual Intensity Rear Clearance Lights (Grote Micro Nova) - all contained within a 3 bolt removable light bracket for easy repairs.
AVAILABLE TARP SYSTEMS
Your Load King End Dump can come equipped with either a Manual or an Electric Tarp Option. This gives you the ability to customize your trailer for your exact needs.
SUSPENSION
The Pedestal is unitized to the bottom of the tub to prevent cracking in high stress areas.
CONSTRUCTION
The Load King End Dump Tub is constructed of 1/4" 450-Hard-Ox with 3/16" front and rear tailgates.
DUMP ANGLE
The Load King End Dump will reach a 43 degree dump angle with all 8 wheels on the ground.
CUSTOM HOIST
Load King utilizes an 8" - 5 Stage Inverted cylinder for its lifting cylinder.
TOP RAIL
Load King End Dumps have a Tubular Steel Rail that is installed in a Self Shedding configuration.
TAIL GATE ADDITIONAL FEATURES
Load King uses Dual action Air-Cylinders for the Gate Locks. It also has a Manual Gate Release on the Center Bolster.
LANDING LEGS
Pin type non load bearing leg.
